Robots w/Lasers

May 18, 2009

Streaming Online A Cure For Wellness 2017 Episodes Online

make up wisudamake up jogjarias pengantin jogjamake up wedding jogjamake up pengantin jogjaprewedding yogyakartaberita indonesiayogyakarta wooden craftdaily review
Filed under: FPGA,Hardware — davr @ 3:26 pm


  1. wow dude long ways away from SinCity 🙂 makin robots..

    Comment by Trusty AKA EMP — May 20, 2009 @ 6:58 pm

  2. Nice roundup. I am surprised that the price is still that high for all of them even with a student discount. I would have thought that there would have been at least one almost giving it away to gain student engineer traction.

    Comment by Alan Parekh — October 10, 2009 @ 3:22 am

  3. Well there’s the $50 one on the cheap end. But FPGA’s are really quite expensive compared to say microcontrollers (where you can get a pretty powerful chip for just a couple bucks). Just the chip alone on the $50 board would run you about $20, then you have to consider the cost of the PCB (generally they are all at least 4 layers, much more expensive than a 2 layer PCB), and all the other peripherals like USB controllers, external memory, etc etc. The chip alone on the $150 DE1 runs about $60-70, plus it’s got a ton of other things on the board.

    Comment by davr — November 5, 2009 @ 9:27 am

  4. Hi David,

    Cann you add this in your sheet. Not so bad for entry level.

    Comment by oakkar7 — August 4, 2011 @ 5:59 am

  5. The FPGA4Fun boards are good, and the documentation is superb. But they don’t provide the source for everything. However, the website is loaded with great examples see

    Comment by David Hsu — September 5, 2011 @ 3:29 pm

  6. is a good entry level board we sell for $50.

    Comment by Tom — February 22, 2012 @ 6:53 pm

  7. Just an update..
    Price of Elbert ( reduced to $35 and there are two new boards came out lately. Mimas Spartan 6 board for $50 ( and Saturn Spartan 6 with DDR for $79 ( Both make good economic entry level boards in my opinion.

    Comment by Tom — December 15, 2013 @ 6:40 pm

  8. It’s really a nice and helpful piece of info. I am satisfied that you shared this useful info with us. Please stay us informed like this. Thanks for sharing.

    Comment by Paper Home Furniture — June 29, 2017 @ 4:04 am

RSS feed for comments on this post. TrackBack URI

Leave a comment

Powered by WordPress

Bad Behavior has blocked 643 access attempts in the last 7 days.